It has a few function that we can make use of to adjust our workpiece
| Function | Infomation |
|---|---|
| Move: Able to move the workpiece around | |
| Scale: Set it to the desired size we want | |
| Rotate: to turn the work piece | |
| Mirror: change the direction the workpiece is facing | |
After making it in fushion we than transfer it to Ultimaker
First Go to files > export
Under types, select STL files and save it to the folder you want
Open Ultimaker Cura 4.12.1 > files (red circle) > select the STL file
Put it to the size you want by using scale.
Before I slice it, I make sure to check my settings.
| Setting | Infomation |
|---|---|
| Layer height | 0.25mm |
| Infill Density | 10% |
| Infill Pattern | Grid |
| Speed | 80mm/s |
| Support | Yes |
| Build Plate Adhesion | Skirt |
Going into preview mode to make sure everything is alright before I start printing
.jpg)